Home  |   About Us   |   Products   |   Market   |   News  |   Feedback   |   Contact Us
 
 
   Refrigerant Gas
Manifolds Gauge
Refrigeration Oil
Generator
Vacuum Pump
Valves
Copper/Steel Tube
Cylinders/Tanks
Air-Conditioners
Chemicals
 
  Home >>MSDS>> Content
  ACESULFAME-K MSDS
   

 

MATERIAL SAFETY DATA SHEET

ACESULFAME K

 

SECTION 1 -- CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

 

MATERIAL NAME: ACESULFAME K

CAS NUMBER: 55589-62-3

SYNONYMS: 6-mythyle –1,2,3-oxathiazine-4(3H)-one-2,2 Dioxide ,

Potassium Salt.

 

SECTION 2 – COMPOSTION /INFORMATION ON INGREDIENTS

 

INGREDIENTS NAME: ACESULFAME K

CAS NUMBER: 55589-62-3

CONCENTRATION: 99.0 Min

 

SECTION 3 - HARZARDS IDENTIFICATION

EMERGENCY OVERVIEW

Physical state: free flowing crystalline powder.

Color & odor: white color, odor less.

 

DUST EXPLOSION HAZARD

 

POTENTIAL HEALTH EFFECTS

 

Relevant Routes of Exposure: inhalation, ingestion, skin contact, and eye contact.

Target organs: Respiratory system , Gastrointestinal system , renal system ,

 dermal system, Ocular system .

 

Acute Effects:

General: May cause mucous membrane irritation (inflammation).

 May cause gastrointestinal effects such as nausea , vomiting ,

 Diarrhea, constipation, cramps, and loss of appetite.

 

Skin: May cause skin irritation.

 

Eye: May cause eye irritation.

 

Chronic Effects:

General: May increase relative disease.

 

Carcinoganicity: Not listed by NTP, IARC, or OSHA.

 

Conditions Aggravated: Hemachromatosis, thalassemia, sideroblastic or sickle cell anemia .

 

SECTION 4 --- FIRST AID MEASURES

 

Inhalation: Remove to fresh air. Get medical attention. if not breathing , Give artificial respiration. if breathing is difficult , administer oxygen by qualified personnel.

 

Skin Contact: Remove contaminated clothing and shoes. Wash skin with soap  and plenty of water. If irritation occurs or persists , get medical  attention. Wash clothing and shoes before reuse.

 

Eye contact: Immediately flush eyes with plenty of water. If irritation occurs or persists, get medical attention .

 

Ingestion: If large quantities of this material are swallowed , get medical Attention immediately. Do not induce vomiting unless directed  by medical personnel. Never give anything by mouth to an unconscious person.

 

SECTION 5 ---FIRE AND EXPLOSION HAZARD DATA

 

Flash point: not applicable

Extinguish media: water spray, carbon dioxide ,and only Tri-class type ABC  chemical extinguishers Unusual fire and explosion hazards: dust explosion hazard.

Fire fighting instructions:

Wear NIOSH /MSHA approved positive pressure , self contained breathing apparatus and full protective turn out gear. Use water to keep fire exposed containers cool.  Use caution in approaching fire.

 

Auto Ignition

Temperature: 1220 F

 

ST: 1, Eartmann Tube.

 

SECTION 6 --- ACCIDENTAL RELEASE MEASURES

 

SPILL CLEAN UP:

Procedures: Review section 3 hazards Identification, and Section 8-Exposure controls

/ Personal Protection before proceeding with the clean up. Shut off the sources of the

spill or leak if it is safe to do so. Eliminate possible ignition sources Scoop or shovel

spilled material into a suitable labeled open head drum. Secure the drum cover and

move the container to a safe holding area. Clean spill area thoroughly.

 

Treatment and Disposal: Dispose of in accordance with recommendations in section

13 Disposal considerations.

 

Reporting Requirement: not applied.

 

SECTION 7 --- HANDLING AND STORAGE

 

Storage Temperature

(Min/max ): < 25 Deg C

Shelf Life: 3 years

Special Sensitivity: Do not heat above 100 degrees C , Light , Moisture,  Heat.

Handing & Storage Precautions:

Do not generate dust or expose to ignition sources. Ground and bond all transfer

equipment. Milling /Mixing /Drying should be performed in devices equipped with

explosion relief or suppression systems or under inner conditions.

Use with adequate ventilation.

Avoid contact with eyes, skin and clothing. Avoid breathing dust

When handing, use proper personal protective equipment specified in section 8.

Wash thoroughly after handling.

Keep container tightly closed when not in use.

Store out of direct sunlight in a cool, well-ventilated area.

 

SECTION 8 --- EXPOSURE CONTROLS / PERSONAL PROTECTION.

 

ENGINEERING CONTROL

Ventilation: General room ventilation is adequate unless the process generate Airborne dust or fume.

 

PERSONAL PROTECTION

Respiration Types(s): Disposable, Nontoxic dust/Mist Filter.

Conditions for use: Under normal conditions of use , respiratory protection is recommended

Under excessively dusty conditions.

Glove materials: Any plastic or rubber glove.

Conditions for use: Gloves are recommended if there is a potential for skin contact

Skin Protection: Use protective clothing ( disposable coveralls, lab coats, etc . ) in both

Production and laboratory areas.

Eye Protection: Safety glasses required, Safety goggles recommended.

 

OTHER CONTROL MEASURES

Additional:

 Protective measures: Provide safety showers and eyewash stations in the work area.

 Prevent the accumulation of dust in the work area by thorough

 Periodic cleaning of the area.

 

EXPOSURE LIMITS

 There are no exposure limits specified either for these materials or for any of its ingredients.

 

SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES

 

Physical state: Free flowing crystalline powder.

Color: White color.

Odor: odorless

Molecular weight: 201.24

Chemical Formula: C4H4KNO4 S

Pure/Mixture: Pure

PE Value: 1 in 100 solution as: 6.5 – 7.5.

Solubility in H2O: Appreciably free soluble.

Solubility others: Slightly soluble in ethanol.

 

SECTION 10 --- STABILITY AND REACTIVITY.

 

Stability: Normally stable eve under fir exposure conditions and hot water reactive.

 

Conditions to avoid: Temperatures : > 100 C  Humidity.

 

Incompatibility:

 Material to avoid: Strong acids and other metal like Aluminum , Iron, Zinc,  Copper, potassium bromate , potassium nitrate ,etc.

 

Decomposition:

 Products: Carbon Dioxide, carbon monoxide, etc.

 

Decomposition

 Temperature: 190 C

 

 Polymerization: No

 

 Condition of Polymerization: will not occur.

 

SECTION 11 --- TOXICALOGICAL INFORMATION

 

Currently research classified that this material is of practically of non toxic to the oral,

the eyes, the skin as well as the whole gestation under the study condition utilized till

now.

 

SECTION 12 --- ECOLOGICAL INFORMATION

 

Not specified in details but referred as per in specification attached.

SECTION 13 ---DISPOSAL CONSIDERATIONS

 

DISPOSAL RECOMMENDATIONS:

This material is suitable for incineration. These recommendations are based on the

product as shipped. Use, processing, alteration or contamination may affect these

disposal recommendations. State, Local or site restrictions affecting the available

proper disposal options may vary.

 

RCRA Waste #: Not regulated under RCRA.

 

Empty Containers: Empty containers must be triple rinsed prior to disposal, recycling or reused.

 

SECTION 14 ---TRANSPORTATION INFOMORMATION

 

Enforcement agency: China of Transportation.

 

Country / Community: China

 

Proper ship Name: Not regulated

 

Proper air name: Not regulated.

 

SECTION 15 ---REGULATORY INFORMATION

 

Law /Regulation: Hazardous chemical reporting.

 

Enforcement agency: Environmental Protection Agency.

 

Governing Authority : China

 

Criteria Met: Acute , Fire

 

SECTION 16 --- OTHER INFORMATION

 

Additional Information: Health, Fire , Reactivity

 

Approval Information

 

Approval date: 8/10 /2005

 

 

 

 

 

 
Copyright © BEST INC., LIMITED All rights reserved
 Powered Byonepound

luxury handbag

ugg sale store

replica discount handbags

jerseys and shoes

luxury handbags

louboutin online shop